Apollo Seiko J-CAT200 COMET, Руководство по эксплуатации

Страница: 59 / 60

Page 59 of 60
26. How To Change Iron Tip
DC-X Type, X-***
1) Make sure to “power off” the unit and let the iron cartridge
(DCX-HET and X-tip) cool down.
Pull down on the DCX-HET and the X-tip..
2)
Pull out X-tip from DCX-HET.
3)
Wipe off the burning inhibitor substance stuck on the top of
DCX-HET.
It can be easily wipped off with a dry cloth.
4)
Insert a new X-tip to DCX-HET.
Make sure that burning inhibitor substance has been applied
and insert a new X-tip.
5)
As shown on the left, the top of DCX-HET has not been
covered with burning inhibitor substance.
In order to apply burning inhibitor substance on DCX-HET,
re-insert the X-tip, pull it down, roatate it to the left and right
several times.
6)
Make sure that burning inhibitor substance has been applied
to the whole top of DCX-HET as shown on the left.
Then insert the X-tip firmly while adjusting the key groove to
the correct position.
Make sure to turn off the power of the unit and let the DCX-HET and X-tip cool
down before replacing.
X-tip
Key groove
Heater
（
DCX-HET
）