Apollo Seiko J-CAT200 COMET, Руководство по эксплуатации

Страница: 55 / 60

Page 55 of 60
24. ZSB feeder adjustment and alignment (Option)
Adjust the ZSB feeder as follows:
The cutting depth of ZSB blade must be adjusted properly to optimal operation. Clean the ZSB
cutting wheel and rollers daily.
1) Remove the cover after loosening the five setting screws.
2) To align the cutting blade shaft, loosen the set screw “1”. To adjust the shaft position, set the
nut to “2”. ove the blade shaft position to match the center of the cutting blade and V grove of the
lower roller.
“3” “1” “2”
3) Tighten the set screw “1”.
4)With the cover removed, attach the reel pin and set the solder wire.
“
4
”