30
10
AUXILIARY FUNCTIONS
FUNC
FUNC
ENTER
SQ/C
Initial Setup
Cable Cloning
Programming Software Installing and Starting (in
windows XP system)
Synchronously press and hold key and key to power on the
transceiver, then you can start initialization.
(Note: All programming data will be automatically delete after this
operation)
With this function, you can copy the programming data of the
transceiver to another one; it can copy parameters and memory
programming data to another transceiver.
Use CP51 wire cloning cable (optional accessory) to connect main
22
transceiver with sub-transceiver through PC or MIC interface.
Restart the main unit power to exit the clone mode.
52
Press main unit key to begin clone, both units will display
32
“
CLONE XX
”. XX stands for the size of current cloned data.
when the clone finish, the sub-transceiver will restart automatically
42
and the main unit display “
CLONE
”, replace the sub-unit with another
unit, and repeat step 2 and step3 to start new clone.(Note: while
main unit in clone mode, repeat step 2 to step 4 to apply cloning
for more units)
Synchronously press and hold the key and key to power on
12
main unit and enter clone mode. the LCD displays “
CLONE
”.
Double click QPS589 setup.exe, then follow the installing instruction.
12
Click start menu in computer ,under “
22
ALL PROGRAMS
” menu,
choose and click “USB To Com port” in QPS589 program, install
“USB To Com port” drives by indication.
Connect the optional PC51 USB Programming cable to USB port in
32
PC with transceiver.
Double click QSP589 shortcut or click QPS589 in procedure index of
42
start menu, choose serial com port as indicated then click OK to
Note:
this software has product identify system. So when firstly installing the
software, you have to connect the products, otherwise, you can not
start the software.
start programming software.(You shall install software before connecting
the USB cable line.)
SCAN
