20
7
Offset Frequency Setup
Frequency Step Size Setup
SCAN
SCAN
ENTER
ENTER
“
”, indicates transmitting frequency is higher than
receiving frequency. if Reverse Function is enabled, Transmitting
frequency will lower than receiving frequency.
“
OFFSET OFF
” shuts offset direction.
Note:
Note:
Invalid when Talk Around function is enabled.
This function is unavailable in channel mode.
This function should coordinate with offset direction setup, which
enable you to communication with another transceiver through a
repeater.
Press key to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays "
OFFSET FREQ
".
Turn selector knob to select the desired offset frequency.
32
Offset frequency range: 00-69.995 MHz. Default: 0.6Mhz.
42
Available only in frequency mode (VFO). Adjusting Frequency by
selector or frequency scan is restricted by frequency step size.
Press key to enter function menu
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until LCD
displays "
STEP
"
Turn selector knob to select the desired step size.
32
Select suitable bandwidth in accordance with different local
conditions.
Available step size: 5K,6.25K,10K,12.5K,20K,25K,30K,50K.
Default: 20K
CHANNEL OPERATIONS
Wide/Narrow Band Setup
Frequency Reverse Setup
SCAN
SCAN
ENTER
ENTER
Press key to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays "
W/N
".
Turn selector knob to select the desired bandwidth.
32
Option: 25K (Wide band), 20K (Middle band), 12.5K(Narrow band).
Default: 25K.
42
The TX/RX frequency will be reversed when this function is enabled:
TX frequency changes to RX frequency, RX frequency changes to
TX frequency. The signaling will also be reversed if CTCSS/DCS
signaling existed.
Press key to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays "
REVERSE
".
Turn selector knob to select the desired setup.
32
ON
: enable frequency reverse
OFF
: disable frequency reverse
