7
3
GETTING ACQUAINTED
Front Panel
Note: This section describes only the main functions of the front panel controls. Explanations for functions not described here are provided in the
appropriate sections of this instruction manual.
1
Power switch /Volume control/Selector knob
7
8
9
10
11
V/M Key
SCAN Key
SQ/C Key
ENTER key
Busy lamp (Green)
2
3
4
5
6
PC/Microphone connection
Display LCD
Speaker
FUNC Key
CALL Key
Turn to adjust the frequency/channel while standby.
•
Press once while standby and then turn to adjust the volume level.
•
Press and hold for 3 seconds while standby to switch off
•
transceiver.
Press once to switch on the transceiver
•
while switch off.
Standard 8 pins interface for PC programming.
•
Connect to microphone for voice communication.
•
16X2 two rows of dot matrix displaying diversified menus and
•
user's information.
For operating prompting and communication.
•
Press it then press relevant key, or press and hold it then within 2
•
seconds press relevant key to achieve multiple shortcut operations.
Press and hold more than 2 seconds to enter background
•
operations.
Press to transmit pre-stored and selected DTMF/2-Tone/5-Tone
•
signaling
Press to switch between frequency mode and channel mode.
•
Press once to enter channel operations setup.
•
Repeatedly Press to select
•
FREQ/CH
Scan, CTCSS/DCS Scan,
Priority watch, then press to confirm.
ENTER
Press and hold to disable squelch while standby, background noise
•
hearable, Release to resume squelch.
Press while in setup mode, transceiver returns to standby and store
•
current setups.
Lights while
•
current
channel receives a matching carrier but un-
matching signaling.
Flashes while a matching carrier and signaling received.
•
12
Transmitting lamp (Red)
Lights while transmitting.
•
13
Power lamp (Yellow)
Lights while power on
•
