10
5
V/M
SQ/C
OPERATING BASICS
Switching The Power On/Off
Adjusting The Volume
Squelch Off / Squelch Off Momentary
Receiving
Switching The Working Mode
Selector Knob Adjusting Frequency/Channel
Press the selector knob once to switch on the transceiver while
switch off, Press and hold it for 3 seconds to switch off while standby.
After switch on the transceiver, press the selector knob once, When
LCD displays ”
SET VOLUME XX
” (XX shows for current volume
level), turn the channel selector knob to adjust volume, Clockwise-
up, anticlockwise-down.
Press key or Microphone key while standby to switch between
VFO mode and channel mode.
Note:
Unavailable while in channel number mode.
Under frequency mode, you can change the current frequency to
the desired one through selector knob; Turn clockwise to increase
frequency; turn anticlockwise to decrease. Every gear will increase
or decrease one step.
Note:
Note:
Note:
5k, 6.25k, 10k, 12.5k, 20k, 25k, 30k, 50k total eight step size
available for this transceiver.
Under channel mode, Turn selector knob clockwise to forward
channel, counterclockwise to backward channel.
The above functions should be set in software, key become a
return key while in function setups.
If the transceiver has set with higher squelch level, it may fail to hear
the calling.
If the green lamp keep lighting, it means the transceiver is receiving a
matching carrier and un-matching signaling. The calling is not audible.
( Please refer to signaling combination setup).
SQ/C
SQ/C
SQ/C
SQ/C
SQ/C
key can be set as “
Squelch Off / Squelch Off Momentary
”
function. This function enable you to monitor weak signal.
The green LED lamp flashes when the channel being called. then
you can hear the calling from the transmitting party.
In relevant modes ,the Microphone [
UP/DWON
] key have the same
function of adjusting frequency or edited channel.(this transceiver
shows only edited channels).
Squelch off: Press key once to disable squelch, background
12
noise appears. Press key again to resume squelch.
Squelch Off Momentary: Press and hold key to disable
22
squelch, background noise appears. Release key to resume
squelch.
