21
7
CHANNEL OPERATIONS
Talk Around
High/Mid/Low Power Switch
SCAN
SCAN
ENTER
ENTER
Note:
Invalid when talk around function is enabled.
When this function is enabled, The transceiver will secede from
repeater station communication mode and transmitting by receiving
frequency and its CTCSS/DCS signaling.
Press key to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays "
TALK AROUND
"
Turn selector knob to select the desired setup.
32
ON
: enable talk around.
OFF
: disable talk around.
Press key to enter function menu
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays "
TX POWER
"
Turn selector knob to select the desired setup.
32
HIGH
: indicates high TX power
MIDDLE
: indicates middle TX power
LOW
: indicates low TX power
Default: High
42
Default: OFF
42
SCAN
ENTER
TX Off Setup
[
PTT
] is invalid when this function is enabled, and the current
channel only works in RX mode.
Press key to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays "
TX INHIBIT
".
Turn selector knob to select the desired setup:
32
ON
: enable TX OFF function, [
PTT
] is invalid.
OFF:
disable TX OFF function, transmitting enabled.
Default: OFF
42
Compander (Reduce noise, Improve communication
Quality)
Enable this function to reduce noise and improve communication
quality, especially in long range communication.
