14
6
FUNC
FUNC
SCAN
ENTER
CALL
V/M
V/M
Priority Monitor
Offset Direction (Shortcut)
High/Mid/Low Power switch (Shortcut)
Enable this function in frequency mode(VFO), the transceiver will
detect the signaling of priority channel every 5 seconds one time.
While in frequency mode (VFO), press key to switch to channel
12
mode, then turn selector knob to select desired monitor channel.
Press key repeatedly, when “
22
PRIORITY WATCH
” appears,
then press key to enter priority monitor
Note:
Note:
The LCD displays "
PRI
" While in priority monitor, and the frequency
will shift in every 5 seconds.
When the priority channel receives a matching carrier and signaling,
it will pause for 10 seconds. If press PTT during this time, the dual
watch will stop and the transceiver start communication by current
receiving frequency.
Press and hold key while standby, then press key within 2
seconds to switch between high/middle/low power. Repeat this
operation, the LCD displays:
"
12
TX POWER HIGH
" indicates you have choose high TX power.
In frequency mode (VFO)/channel mode, you can repeatedly press
Microphone key to switch between high /middle/low TX power.
This operation is invalid in channel number mode.
Press and hold key while standby, then press key within 2
seconds to switch offset direction. Repeat this operation, the LCD
displays:
“
12
” indicates transmitting frequency is higher than
receiving frequency, if reverse function is enabled, transmitting
frequency will lower than receiving frequency.
“
22
OFFSET-
” indicates transmitting frequency is lower than
receiving frequency, if reverse function is enabled, transmitting
frequency will higher than receiving frequency.
SHORTCUT OPERATIONS
"
32
OFFSET OFF
" indicates shut offset.
"
22
TX POWER MIDDLE
" indicates you have choose middle TX power.
"
32
TX POWER LOW
" indicates you have choose low TX power.
