25
8
FUNC
SCAN
SCAN
SQ/C
Scan Dwell Time Setup
Repeatedly press key or Microphone [
12
UP/DOWN
] key until
LCD displays "
SQUELCH LEVEL
".
Turn selector knob to select the desired level
22
00-20: Total 21 levels available; 00: Minimum ~ 20:Maximum
32
Default: 04
42
Remind : Press and hold key, then turn selector knob also can
adjust the squelch level.
Note:
Note:
If the squelch level is too high, the transceiver will fail to get weak
signal; if the squelch level is too low, the transceiver will be easily
disturbed.
Four types of scan dwell time available.
Press and hold key for over 2 seconds to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until
LCD displays "
SCAN DWELL TIME
".
Turn selector knob to select desired setup:
32
5SEC
: scan pause for 5 seconds when search a matching signal,
then continue to scan.
10SEC:
scan pause for 10 seconds when search a matching signal,
then continue to scan.
15SEC:
scan pause for 15 seconds when search a matching signal,
then continue to scan.
Pause
: Scan pause when search a matching signal , Continue to
scan after signal disappears 2 seconds.
Default: 15SEC
52
HIGH
: High brightness
This setup can be also applied in CTCSS/DCS scan.
BACKGROUND OPERATIONS
FUNC
SCAN
LCD Backlight
Press and hold key for over 2 seconds to enter function menu.
12
Repeatedly press key or Microphone [
UP/DOWN
] key until
LCD displays "
LCD BACKLIGHT
".
Turn selector knob to select desired setup.
22
LOW
: Low brightness
Default: HIGH
42
