26
8
FUNC
FUNC
FUNC
SCAN
SCAN
SCAN
Current Voltage Display
DTMF ANI On/Off
Press and hold key for over 2 seconds to enter function menu.
12
Repeatedly press key or Microphone [
UP/DOWN
] key until
LCD displays "
VOLTAGE
".
The LCD will show current voltage.
22
Choose Tone-Pulse Frequency
This function is used to start the repeater; it needs a certain intensity
of Tone-pulse single to start the sleep repeater. Usually when
repeater has started, repeater system does not require this Tone-
pulse.
Press and hold key for over 2 seconds to enter function menu.
12
Repeatedly press key or Microphone [
UP/DOWN
] key until LCD
displays "
TBST
".
Turn selector knob to select desired setup:
22
1750Hz
: Tone-burst frequency is 1750Hz;
2100Hz
: Tone-burst frequency is 2100Hz;
1000Hz
: Tone-burst frequency is 1000Hz;
1450Hz
: Tone-burst frequency is 1450Hz:
Default: 1750Hz
42
ANI function is available through DTMF signaling or 5-Tone signaling.
Enable this function to realize DTMF ANI function, the transceiver
will display the caller's ID number when it receives a DTMF ANI
calling.
Press and hold key for over 2 seconds to enter function menu.
12
Repeatedly press key or Microphone [
22
UP/DOWN
] key until LCD
displays "
DTMF ANI
".
Turn selector knob to select desired setup:
32
OFF
: DTMF ANI function off
Default: OFF
42
ON
: DTMF ANI function on
Use software to set up 5-Tone ANI function.
There are 3 display modes for selection: channel fre channel
number, channel number, channel name + channel number.
Note:
Use software to set up DTMF ANI function.
BACKGROUND OPERATIONS
Display Mode Setup
