AnyNet AnyNet-12824, Руководство по эксплуатации системы

Страница: 49 / 195

49
Update Firmware: Click this icon to update the Firmware of IP camera.
4.
Register Code:
You can connect to the IP camera by Mac ID registration. This is an optional
function if you use the IP camera from the other vendor. Please contact your vendor for the
license code. The register code process diagram as below.
a.
Click “ Register code ” and inform the “ MAC ID ” for your vendor to get the code.
b. Fill the code and click “ Register ’. After registering, the number of supported IP cameras will be
shown on the “Port ” area.
c. Double click the IP camera from the “ Device list ” for setup.
d. Double click the IP camera number to connect the camera and parameter setting.5; ru
There is no need to have the “ Register code ” when you use I-View’ s IP Camera.
These settings must match
with the setup of IP camera.
Inform the MAC ID and get
the code from your vendor