AnyNet AnyNet-12824, Руководство по эксплуатации системы

Страница: 121 / 195

121
Vandalism detection (Option): The NVR can send an alarm or other kinds of notifications if there
is IP camera is moved position or rapped the camera by force. This function can protect the camera
to avoid vandalism. To activate this function, check “ Vandalism detection” icon.
The Intelligent Video Analytics (IVA) functions as below for the IVA camera series only. The IVA
camera supports the functions as below and the NVR can send an alarm or other kinds of notifications
when IVA functions are triggered. For the detail IVS setting process, please refer to the manual of the
IVA camera. The IVA function description as below,
Region detection: Check this function to detect the object entry, leave or stay the setting region area.
Object detection: Check this function to detect the leave or miss object message from IP camera.
Object Counting: Check this function detects the object number and show the value on the view log.
Or pop up alarm message when object number mote than setting value. The event will record on
the view log table.
Tripwire detection:
Check this function to detect the object cross the tripwire.
Color distortion detection: Check this function to detect the video color cast problem of the camera.
Video overexposure detection: Check this function to detect the video overexposure problem.
Lose focus detection: Check this function to detect the loose focus problem of the camera.
Video dark: Check this function to detect the video color too dark problem.
Video occlusion detection: Check this function to detect the video occlusion problem.
Following the instructions below to notify when the above events detection:
Enable alarm siren: Set up an audio warning siren sound (or recorded voice) when shake is
occurred on this camera.
Enable notification: Each camera can have its own unique setup for notifications when shake is
occurred.
Shift PTZ position: Set one or more of your connected PTZ cameras to move for one or more
preset positions when a shake is occurred on this particular camera.
Trigger output relays: Select the output relays from Relay board or the alarm output of IP camera.
The NVR can automatically turn ON external devices (such as siren horns, strobe lights, ceiling
room lights, etc.) when shake is occurred on this camera.