AnyNet AnyNet-12824, Руководство по эксплуатации системы

Страница: 118 / 195

118
Step 4. Repeat step 1 through 3 to add other PTZ cameras to move upon motion detection.
For “
Return to preset position(s) when stop trigger
” setup, please follow the same
procedures with the “
Move to preset position(s) when triggered
” section.
Alarm zones setup (Optional): This function can be enabled when the public address server
connected to the NVR. The public address server will announce to the camera site via group(s) or
zone(s) automatically when the NVR is triggered. Follow up the steps shown as below to setup
announcement area:
Step 1. Choice “ Zone ” and “ Group ” where will announce when NVR is triggered. The detail
setting process of “ Zone ” and “ Group ”, please refer to “ Public address configuration ”
chapter.
Step 2. Record or choice the existed alarm sound files and setup the interval period between files and
press “
Add
” icon to save the file. Click the selected files and click “
Delete
” to remove the
selected alarm sound file.
Step 3.
Enable chime sound if you want to play chime sound before alarm sound.
Step 4.
Adjust the audio volume for play alarm sound.
Play s chime sound
before alarm voice
Adjust alarm voice
volume
List selected zones
and groups
Select announcement
area by zone and
group
Record/Play alarm
sound file
List selected alarm
sound files
Browse /Select the
existed sound file