AnyNet AnyNet-12824, Руководство по эксплуатации системы

Страница: 115 / 195

115
Step 1. Click “ FTP notify ” field.
Step 2. Input the DNS name and port number
(default is port 21) which the user
wishes to send the triggered information
to this FTP server.
Step 3. Entry the “User name” and “Password”
of FTP server for login.
Step 4. Enable “Passive mode” for some special
FTP server. Ask your MIS staff for the
detail setting.
Step 5. Entry the saving path and check
“Attached image file” icon, if you
needed.
Step 6. Click “ Save ” button to save your pending entry. This entry will be listed at the bottom
section of this window.
Step 7. Repeat s tep 2 through 4 to add other phone call notification entries.
Notify by Phone Call: Upon motion detection, the
NVR system can dial the listed phone number(s)
and play a recorded message or siren. Please follow
the steps below to set up phone call notification
entries. Before setting up for phone call
notification, please refer to “
System
configuration ” for dial-up voice modem setup
first.
Step 1. Click “ Phone call ” field.
Step 2. Input the phone number the user wish to
call.
Step 3. Click “ Sound File setup ” button to choose
an alarm siren or to record your own voice message.