AnyNet AnyNet-12824, Руководство по эксплуатации системы

Страница: 165 / 195

165
6-12-1. Storage devices setup
Storage devices setup:
Generally speaking, C: \ hard disk is the storage Operation System. The
system will not check this hard disk for recording automatically; unless the NVR has only one C: \
hard disk. Get information about the usage and remaining capacity of each hard disk in this dialog
box.
By default, all cameras record to all hard disks except C: \; in general, C: \ is the storage system disk,
the system will not automatically check this hard disk for recording; unless the recorder has only one
C: \ hard disk.
。
The NVR system allows a specific camera(s) to record to a specified hard disk. The operation method
is as follows:
1. Double-click No. 1 and select the hard disk to remain at No. 1.
2. Double-click No. 2 and select the camera number to be recorded on this hard disk.
3.
Enter the value (It is recommended to set the capacity to 3%-5% of the total hard disk capacity in
the number) on the "Start to erase when free space less than" field, and also set up the value of
"Space to erase at once" (Recommend is 3000M). When the hard disk space is lower than the
input value, the system will delete the oldest video file automatically. The delete hard disk size
each time will the same as the setting value of the value of the "Space to erase at once".
4. Press the "Save" button to complete the setting.
5. Repeat steps 2-4 to add another batch of specific cameras to record to another designated hard disk.
6. To cancel the recording of a specific camera with the specified hard disk, double-click the number 1
and then select the hard disk to remain at No 1, and then press the "Save" button to finish modifying
the settings of the specified hard disk.
Start to erase when free space less than: It will start to erase the oldest video files to get the free
space on the hard disk when only a certain amount of space is left on your hard disk. Older files are
erased first.
a.) Space to erase at once:
This specifies the amount of disk space to erase when the above limit is
reached. Older files are erased first. For example, if you type 1200 MB, the system will erase 1200MB
when the limit is reached.
Please setup about 3~5% free space at least before start to erase the file and delete the file about 30G