AnyNet AnyNet-12824, Руководство по эксплуатации системы

Страница: 109 / 195

109
below:
Motion setup:
The user will be fine-tuning how the NVR starts recording if people or objects are moving in the
angle of view. To access this section, simply click “ Motion setup ” from “ Select detection ” drop
bar. There are “ Software detection ” and optional “ Hardware detection ”. For hardware motion
detection, the user will need to purchase a PCI I/O board or use the I/O ports f IP camera to
connect its existing burglar alarm motion detectors. The motion setup can only take effect if the
user selected “
motion triggered recording
” from the recording schedules. (See
“Schedule
Setup”
from “
Recording
”). The user can verify if you have properly activated the recording
schedule for certain cameras from its number button on the “ Video control panel ”. The camera
number shall appear as light blue (scheduled to record) or red (currently recording).
Software Detection – You can select and frame multiple areas in the view of the camera for software
detection. This function will help you save disk space, but it will also produce multiple false alarms.
Consider hardware detection for better performance.
Sensitivity Level –You can adjust the sensitivity of the software motion detection. Simply move the
slider bar to right side for increasing sensitivity level or to the left side for decreasing it.