Anritsu MG369 C Series, Руководство по программированию

Страница: 221 / 266

Command Directory 3-4 Commands
MG369xC GPIB PM PN: 10370-10374 Rev. F 3-121
VM1
Description:
Turns on the video marker mode.
When the video marker mode is turned on, the MG369xC generates a pulse output at
each marker frequency that can be seen on a CRT display.
Functional
Category:
MARKER
Related
Commands:
MK0
,
ME1
,
ME0
Front Panel Key: Frequency | Step Sweep | Frequency Control > | Marker List. . . | Video Markers
to
On
VT
Description:
Volts data terminator.
Functional
Category:
DATA TERMINATOR
Front Panel Key:
N/A
W1 <value> <unit>
Description:
Opens the internal pulse width 1 parameter.
Functional
Category:
PARAMETER ENTRY
Value:
30 ns to 167 ms with 100 MHz pulse clock rate;
25 ns to 419 ms at 40 MHz pulse clock rate;
100 ns to 1.6 s at 10 MHz pulse clock rate
Units:
SEC, MS, US, NS
Example:
W1 50 US; PER 100 US; PMD1; PTG1; IP
Turns internal pulse on with a 50  s pulse every 100  s.
Output Command:
OW1
(in  s)
Front Panel Key: Modulation | Pulse
(internal)
| Wdth/Dly List. . . | Edit Selected
W2 <value> <unit>
Description:
Opens the internal pulse width 2 parameter.
Functional
Category:
PARAMETER ENTRY
Value:
30 ns to 167 ms with 100 MHz pulse clock rate;
25 ns to 419 ms at 40 MHz pulse clock rate;
100 ns to 1.6 s at 10 MHz pulse clock rate
Units:
SEC, MS, US, NS
Output Command:
OW2
(in  s)
Front Panel Key: Modulation | Pulse
(internal)
| Wdth/Dly List. . . | Edit Selected