Ankom HS Скачать руководство пользователя | Manualshive

Страница: 5 / 96

background image

Operator’s Manual

Rev 9/20/18

pg. 5

Introduction

ANKOM  Technology  designs,  manufactures,  and  markets  instruments  and  support  products  used  by  analytical  laboratories
around  the  world  in  the  food,  feed,  bio-energy,  agricultural,  and  environmental  industries.  ANKOM  Technology  can  provide
you  with  products  for  determining  or  monitoring  dietary  fiber,  detergent  fiber,  crude  fiber,  fat,  digestibility,  microbial
fermentation (anaerobic or aerobic) and more.

Committed to Total Customer Satisfaction, ANKOM designs every product based on a thorough assessment of customer needs.

Congratulations on your purchase of the

ANKOM

TDF

Dietary Fiber Analyzer

.

We are confident that this product will

effectively serve your needs.

The ANKOM

TDF

Dietary Fiber Analyzer was designed to eliminate most of the manual steps required by the method. This

reduces technician variation, increasing precision. By carefully following the operating instructions in this manual you will
understand the details of sample and filter bag handling as well as instrument control, helping you to achieve the best possible
results.

Please review the entire manual before you begin operating this product.

Warranty

ANKOM Technology warrants the ANKOM

TDF

Dietary Fiber Analyzer against any defects in workmanship or material for one

year after the original date of purchase. This warranty does not include damage to the instrument resulting from neglect or
misuse. During the warranty period, should any failure result from defects in workmanship or materials, ANKOM Technology
will, at its discretion, repair or replace the instrument free of charge.

Extended warranties are available upon request.

Filter Bags

Use ANKOM Technology filter bags (part #’s DF-I, DF-S, DF-FT) in your ANKOM

TDF

Dietary Fiber Analyzer. Filter bags can

be purchased from ANKOM Technology or from your local authorized ANKOM distributor.

Contact Information

Committed to your total satisfaction, we are always available to help you get the most from your ANKOM products and to
receive any comments or suggestions you might have to help us improve.

For any questions or suggestions regarding your instrument, please contact us at:

•

Telephone: (315) 986-8090

•

Fax: (315) 986-8091

•

Email: [email protected]

•

www.ankom.com

«
...
3
4
5
6
7
...
»

Содержание HS

































































































Отзывы:

Нет отзывов

Похожие инструкции для HS

Бренд: Cablescan Страницы: 58

Бренд: Idexx Страницы: 6

Бренд: IDEAL INDUSTRIES Страницы: 10

Бренд: M-system Страницы: 5

Бренд: Xtralis Страницы: 13

Бренд: Tektronix Страницы: 124

Бренд: Ntron Страницы: 29

Бренд: Young Страницы: 5

SiteHawk SK-6000

Бренд: BIRD Страницы: 69

Бренд: Kirby Morgan Страницы: 101

Бренд: BASI Страницы: 69

Бренд: Vega Страницы: 44

Бренд: Harken Страницы: 2

Бренд: Huvitz Страницы: 58

Бренд: PCE Health and Fitness Страницы: 66

Бренд: Benetech Страницы: 16

WIDE ANGLE CONVERSION PORT 2

Бренд: Nauticam Страницы: 12

Бренд: Lasertec Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды