6.2.2.
CPRC Controller - PID - Shunt Position - PROGRAM MODE
While in the PROGRAM MODE, changes may be made to the CPRC Control related parameters. Access
is gained as follows:
From the Normal Display, press the
ÿø
key until the following is visible:
SELECT <->
CONTROLLER
SETUP
With FUNCTION shown in the lower display line,
ÿö
key. The following will now be
visible on the user display:
CONTROL
FUNCTION
STLR XXXX XXXX
ñ
NOTE: XXXX will be vary depending on which options the unit has
ÿø
key until CPRC is flashing,
ÿþ
key to select. Available parameters are:
CPRC CONTROL TYPE
[DIRECT]
[REVERSE]
ÿü
to change,
÷
or
ø
to choose,
ÿþ
to save
Definition: This parameter selects the control action for the PID
Controller associated with the Cold Product.
Direct = Cooling
Reverse = Heating
ÿø
TO ADVANCE TO NEXT SELECTION
Revision 3.0
Section 6
10
