CPRC CURRENT OUTPUT
[1 THROUGH 4]
ñ
NOTE: This parameter only active if PID chosen as control type
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This parameter will tie a PID control output to one of the
available 4-20 mA outputs. A mA output board MUST be
present - be sure no other functions utilize the same re-
transmit.
ÿø
TO ADVANCE TO NEXT SELECTION
CPRC OUT RECORDING
[RED]
[BLACK]
[BLUE]
[GREEN]
[NOT
RECORDED]
ÿü
to change,
÷
or
ø
to choose,
ÿþ
to save
Definition: This parameter, when active, will record the resulting output of
the CPRC PID Controller. Only applies if PID control
selected.
ÿø
TO ADVANCE TO NEXT SELECTION
CPRC OUT DISPLAY OPT
[ NOT DISPLAYED ]
[ IN CONTINUOUS MODE ]
[ IN SEQUENTIAL MODE ]
[ IN BOTH MODES ]
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This parameter, when active, will display the resulting output of
the CPRC PID Controller, if controller is active.
ÿø
TO ADVANCE TO NEXT SELECTION
Revision 3.0
Section 5
13
