7.2.
Configuration Menu - Inputs
7.2.1.
Inputs - Shunt Position - PROGRAM MODE
While in the PROGRAM MODE, changes may be made to parameters which affect the AV-9900 input
selections. All parameters may not be accessible, as many are dependent on activation by another
parameter or option. Access is gained as follows:
ñ
Note: This programming menu is NOT available for modification while unit is in
the RUN mode of operation.
ñ
Note: Refer to General Instrument Operations section for instructions on
identifying RUN and PROGRAM mode of operation.
From the Normal Display,
ÿø
key until the following is visible:
SELECT <->
CONFIGURATION
With CONFIGURATION shown in the lower display line,
ÿö
key.
ÿø
until the
following is visible on the user display:
CONFIGURE <->
INPUTS
With INPUTS shown in the lower display line,
ÿö
key. Depending on the instrument
configuration, STLR, SFLR, CPRC and HWC input choices may be present.
ÿø
until desired choice is flashing, then
ÿþ
to enter appropriate section.
Upon viewing all parameters for a selected input, the menu will continue to scroll to the next
parameter.
ÿú
to exit and return to the main system display. Available parameters are:
Revision 3.0
Section 7
7
