[DA1 DA2 DA3 DA4]
[DA5 DA6 DA7 DA8]
[F1 F2 F3 F4 F5]
[RESET MOD ENTER]
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This parameter allows linking an LED to a system event.
ÿø
to select next LED, or
ÿú
to return to normal display.
7.11.
Configuration Menu - Relays
7.11.1.
Relays - Shunt Position - RUN MODE
No programming access is allowed under the RUN mode.
7.11.2.
Relays - Shunt Position - PROGRAM MODE
ñ
Note: Refer to General Instrument Operations section for instructions on
identifying RUN and PROGRAM mode of operation.
From the Normal Display,
ÿø
key until the following is visible:
SELECT <->
CONFIGURATION
With CONFIGURATION shown in the lower display line,
ÿö
key.
ÿø
until the
following is visible on the user display:
CONFIGURE <->
RELAYS
With RELAYS shown in the lower display line,
ÿö
key.
Revision 3.0
Section 7
60
