4.
Quick Start - How To
The Quick Start - How To section is designed to fully illustrate the most common operations that are
performed on the AV-9900. References, where applicable, will also be given to additional areas of
coverage throughout the manual.
4.1.
How Do I Start and Stop Chart Printing
The AV-9900 differs from traditional circular chart recorders in that a print mechanism not only records
data to the chart, but also prints times and chart scales. For this reason, it is necessary to tell the AV-9900
when we want to stop a chart from spinning, or we are ready to start printing a new chart.
ñ
NOTE: The Change Chart Procedure is initiated while the unit is in the RUN mode.
4.1.1.
Stop Printing Chart
The Stop Print routine is generally used when we have completed a processing run, and wish to remove the
chart from the AV-9900. The procedure is as follows:
1.
ÿý
key to initiate Stop Chart routine
2.
Display will show:
STOP CHART
NO YES
3.
ÿ
YES (Or
ùú
to cancel)
4.
Chart will stop rotating, unit will move to Divert Flow, NO data collection is active
5.
At this point a chart may be removed - the unit may be left in this mode until such time that
operation of the process loop is ready to start again. Displays will remain active for temperature
verification.
4.1.2.
Start Printing New Chart
The Start Print routine is generally used when we are ready to start a new processing run. A new chart
will be started, complete with new scales. As the unit will print scales, time and date information; it is not
necessary to record any of that information manually.
1.
ÿý
key to initiate Start Chart routine
2.
Display will show:
START NEW CHART
NO
YES
3.
ÿ
YES (Or
ùú
to cancel)
Revision 3.0
Section 4
1
