5.4.
Function Setup Menu - SFLR
The following section, SFLR (Safety Flow Limit Recorder), will illustrate the various programming options
related to this function.
ñ
Note: This is an optional function, and may not be present on your unit.
5.4.1.
SFLR - Shunt Position - RUN MODE
While in the RUN MODE, changes may be made to many parameters considered non-operation critical. All
parameters may not be accessible, as many are dependent on activation by another parameter. Access is gained
as follows:
ñ
Note: Refer to General Instrument Operations section for instructions on identifying
RUN and PROGRAM mode of operation.
From the Normal Display,
ÿø
key until the following is visible:
SELECT <->
FUNCTION
SETUP
With FUNCTION shown in the lower display line,
ÿö
key. The following will now be
visible on the user display:
SELECT
FUNCTION
STLR XXXX XXXX
ñ
NOTE: XXXX will be vary depending on which options the unit has
ÿø
key until SFLR is flashing (parameter may not initially be shown on display),
ÿþ
key to select. Available parameters are:
Revision 3.0
Section 5
24
