7.4.
Configuration Menu - Current Outputs
This section outlines configuration of the mA current output hardware.
7.4.1.
Current Outputs - Shunt Position - RUN MODE
No programming access is allowed under the RUN mode.
7.4.2.
Current Outputs - Shunt Position - PROGRAM MODE
While in the PROGRAM MODE, changes may be made to parameters which affect the current outputs.
All parameters may not be accessible, as many are dependent on activation by another parameter. The
available current outputs are:
STLR INPUT =
mA retransmission of STLR Input Temperature
SFLR INPUT =
mA retransmission of SFLR Input Signal
SFLR OUTPUT =
mA output from SFLR PID Controller
CPRC INPUT
=
mA retransmission of CPRC Input Signal
CPRC OUTPUT =
mA output from CPRC PID Controller
HWC INPUT
=
mA retransmission of HWC Input Signal
HWC OUTPUT =
mA output from HWC PID Controller
ñ
NOTE: The AV-9900 is capable of having a maximum of FOUR current outputs.
Access is gained as follows:
ñ
Note: Refer to General Instrument Operations section for instructions on
identifying RUN and PROGRAM mode of operation.
Revision 3.0
Section 7
32
