AMX Modero G5, Инструкция по эксплуатации

Страница: 24 / 144

Settings Menu
14 Modero G5 Touch Panels - Configuration and Programming
2.
Choose a sound from the presented list: selecting a new sound will play it once. The sound will only be audible if
the
Media slide bar in Volumes is not muted.
3.
Once you select the preferred sound, click OK to save it. The sound’s name will now appear under the category in
the Sound page.
4.
If you wish to return to the Sound page without making any changes, click Cancel .
Selecting a Default Notification Sound
To select a particular sound to be the default notification sound for all touch panel functions:
1.
In the Sound page, select Touch Sounds to checkmark it.
2.
Select Default notification sound . This opens the Default notification sound window.
3.
Choose a sound from the presented list: selecting a new sound will play it once. The sound will only be audible if
the
Notifications slide bar in Volumes is not muted.
4.
Once you select the preferred sound, click OK to save it. If you wish to return to the Sound page without making
any changes, click Cancel .
Display
The Display page (FIG. 20) controls the basic functions of the touch panel display, including the panel brightness.
FIG. 20 Display page
Display page options
Brightness: Sets the display brightness and contrast levels of the panel (FIG. 21).
Move the slidebar to the left or right to adjust the brightness level.
Display Timeout: Indicates the length of time that the panel can remain idle before the display automatically powers
down (FIG. 22).
• Select the Display Timeout setting. Range = 15, 30 seconds, 1, 5, 10, 30 minutes, 1, 2 hours.
• Set the timeout value to None to disable Display Timeout mode.
Font Size: Sets the size of the displayed font in the Settings menu (FIG. 23). Range = Small. Normal, Large,
Huge.
Calibration Test: Select this to open the Calibration Test page (page 16).