AMX Modero G5, Инструкция по эксплуатации

Страница: 50 / 144

Settings Menu
40 Modero G5 Touch Panels - Configuration and Programming
Removing All Data From the Touch Panel
To reset the touch panel to its factory defaults and remove all data stored in the device:
1.
From the Reset and Update page, select Factory Data Reset to open the Factory Data Reset window (FIG. 69).
2.
To erase all data from the touch panel, click the
Reset Device
button at the bottom of the window. To return to the
Reset and Update page without making any changes, select Reset and Update at the top of the window.
Storing and Loading Settings Configuration Files
G5 Touch panels have a lot of settings. The
Store Settings
and
Load Settings
options on the
Reset and Update
page
provide the ability to to store and load these settings to and from a Settings Configuration File (*.acfg). Use cases
include:

Backing up final system settings

Create settings configuration files ahead of time to help with large deployments of touch panels.
Saving the Current Settings
1.
In the Reset and Update page, select Store Settings . This opens the Store Settings window (FIG. 70):
2.
Enter a unique file name for this settings configuration file.
The UI will check for a valid config filename as it's being entered. Invalid entries will not be saved.
3.
Press OK to save the file at the root of the USB drive.
If the filename exists, the app will prompt you to verify overwriting the file.
Reset and Update page options (Cont.)
Firmware Update
Update Firmware Select this to open the Firmware Update window (FIG. 73).
Panel Pages:
Install Pages From
External Disk Select this to open the TPDesign5 File Browser window (FIG. 77).
Remove User Pages Select this to remove all previously loaded user pages from the touch panel.
FIG. 69 Factory Data Reset window
FIG. 70 Store Settings window