AMX Modero G5, Инструкция по эксплуатации, Страница: 120 / 144

Programming - Send Commands
110 Modero G5 Touch Panels - Configuration and Programming
SIP Call Management Commands
The following table lists and describes SIP commands that are sent to the touch panel to manage calls.
SIP Call Management Commands
^PHN-ANSWER Answers the call.
Syntax:
"'^PHN-ANSWER,<connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-ANSWER,1'"
^PHN-AUTOANSWER Enables (1) or disables (0) the auto-answer feature on the phone.
Syntax:
"’^PHN-AUTOANSWER,<state>’"
Variable:
state = 0 (Disable) or 1 (Enable)
Example:
SEND_COMMAND Panel,"'^PHN-AUTOANSWER,1'"
Enables the auto-answer feature.
?PHN-AUTOANSWER Queries the state of the auto-answer feature.
The panel responds with the ^PHN-AUTOANSWER, <state> message.
Syntax:
"'?PHN-AUTOANSWER'"
Example:
SEND_COMMAND Panel,"'?PHN-AUTOANSWER'"
^PHN-CALL Calls the provided number.
Syntax:
"'^PHN-CALL,<number>'"
Variable:
number = The provided phone number
Example:
SEND_COMMAND Panel,"'^PHN-CALL,2125551000'"
^PHN-DTMF Sends DTMF codes.
Syntax:
"'^PHN-DTMF,<DTMF code>'"
Variable:
DTMF code = 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, POUND, or ASTERISK.
Example:
SEND_COMMAND Panel,"'^PHN-DTMF,1234567879ASTERISK'"
^PHN-HANGUP Hangs up the call.
Syntax:
"'^PHN-HANGUP,<connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-HANGUP,1'"
^PHN-HOLD Places the call on hold.
Syntax:
"'^PHN-HOLD,<connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-HOLD,1'"