AMX Modero G5, Инструкция по эксплуатации

Страница: 55 / 144

Settings Menu
45 Modero G5 Touch Panels - Configuration and Programming
2.
Insert the USB stick into an available USB port. This may require disassembling wall-mounted touch panels to
access the USB ports if a USB extension was not already installed.
3.
From the Firmware Update window, select Install Firmware from USB to open the KIT File Browser window
(FIG. 75).
4.
Select the KIT file to be installed.
5.
The device will now upload the new firmware (FIG. 76) and then reboot.
Installing Touch Panel Pages From an External Disk
TPDesign5 page files may be loaded onto a touch panel, both via TPDesign5 and through files saved to a USB-enabled
external drive.To load TPD5 pages via USB:
1.
Download the panel pages and save them to a USB stick or other external drive with USB capability.
2.
Insert the USB stick into an available USB port. This may require disassembling wall-mounted touch panels to
access the USB ports if a USB extension was not already installed.
3.
From the
Reset & Update
window, select
Install Pages from External Disk
to open the TP5 File Browser window
(FIG. 77). The page files or the folder in which they are stored will appear in the window.
FIG. 75 KIT File Browser window
FIG. 76 Update Progress display
For more information on updating firmware for your touch panel, particularly
concerning the format and the directory placement of the firmware upgrade, please
refer to the
Upgrading Firmware section of the touch panel’s Operation Reference
Guide. The Operation Reference Guides for the Modero X Series G5 touch panels
are available at www.amx.com.