Configuration and Firmware Update
32
NI-3101-SIG Signature Series NetLinx Integrated Controller
6.
Click the
Edit Settings
button (
on the Communications Settings dialog
) to open the
TCP/IP
Settings
dialog (FIG. 23). This dialog contains a series of previously entered IP Address/URLs and
their associated names, all of which are stored within NetLinx Studio and are user-editable.
7.
Click the
New
button to open the
New TCP/IP Setting
dialog box (FIG. 24), where you may enter
both a previously obtained DHCP or Static IP Address and an associated description for the
connection into their respective fields.
8.
Place a checkmark within the
Automatically Ping the Master Controller to ensure availability
radio
box to make sure the Master is initially responding online before establishing full communication.
9.
Click
OK
to close the current
New TCP/IP Settings
dialog box and return to the previous
TCP/IP
Settings
dialog box. Locate the new entry within the
List of Addresses
section.
10.
Click the
Select
button to make the new entry the currently used IP Address communication
parameter.
11.
Click
OK
to return to the
Communications Settings
dialog and place a checkmark within the
Authentication Required
radio box if the Master has been previously secured with a username/
password.
FIG. 23
TCP/IP Settings dialog box
FIG. 24
New TCP/IP Setting dialog box
Содержание FG2105-08
Страница 12: ...Introduction 6 NI 3101 SIG Signature Series NetLinx Integrated Controller...
Страница 46: ...Configuration and Firmware Update 40 NI 3101 SIG Signature Series NetLinx Integrated Controller...
Страница 142: ...NetLinx Security with a Terminal Connection 136 NI 3101 SIG Signature Series NetLinx Integrated Controller...
Страница 175: ...Troubleshooting 169 NI 3101 SIG Signature Series NetLinx Integrated Controller...