manualshive.com logo in svg

AMX FG2105-08, Руководство по эксплуатации/справочник

Поделиться
Скачать
AMX FG2105-08 Скачать руководство пользователя страница 25

Connections and Wiring

19

NI-3101-SIG Signature Series NetLinx Integrated Controller

Ethernet ports used by the Integrated Controllers

Ethernet Ports Used by the NetLinx Integrated Controllers

Port type

Description

Standard Port 

#

FTP

The on-board Master has a built-in FTP server.

21/20 (TCP)

SSH

The SSH port functions using the same interface as Telnet but over a 
secure shell where it uses SSL as a mechanism to configure and diagnose 
a NetLinx system. This port value is used for secure Telnet 
communication.

Note: only SSH version 2 is supported.

22 (TCP)

Telnet

The NetLinx Telnet server provides a mechanism to configure and 
diagnose a NetLinx system. 
For maximum flexibility, the Master can be configured to utilize a different 
port than 23, or disable Telnet completely from either Telnet or the 
Program port located on the rear of the Master itself. Once disabled, the 
only way to enable Telnet again is from the Master’s Program port. 

 23 (TCP)

HTTP

The Master has a built-in web server that complies with the HTTP 1.0 
specification and supports all of the required features of HTTP v1.1. 
This port is used for unsecure HTTP Internet communication between the 
web browser’s UI and the target Master.

80 (TCP)

HTTPS/SSL

This port is used by a web browser for secure communication between the 
web server UI and the target Master. This port is also used for 
simultaneous encryption of this data, using the SSL certificate information 
on the Master as a key.

443 (TCP)

ICSP

Peer-to-peer protocol used for both Master-to-Master and Master-to-
device communications.
For maximum flexibility, the Master can be configured to utilize a different 
port than 1319, or disable ICSP over Ethernet completely from either 
Telnet or the Program Port located on the rear of the Master itself.
This type of communication is used by the various AMX products for 
communication amongst themselves.

1319 (UDP/TCP)

integration!
Solutions

This feature on the Master uses, by default, port 10500 for the XML based 
communication protocol. This port is connected to by the client web 
browser’s JVM when integration! Solutions control pages are retrieved 
from the on-board Master’s web server. 
For maximum flexibility, the on-board Master can be configured to utilize a 
different port than 10500 or to disable integration! Solutions completely. 

10500 (TCP)

Содержание FG2105-08

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды