AMX AVB-RX-DGX-SC Fiber-DVI, Инструкция по эксплуатации

Страница: 11 / 79

Overview and Specifications
7 DGX Transmitters & Receivers Instruction Manual
Overview and Specifications
Applicability Notice
The information in this manual applies to the four DGX Transmitter (TX) and Receiver (RX) modules
listed in the table below.
Important:
These modules are compatible only with each other and with other AMX DGX Signal
Management products.
DGX TX and DGX RX Modules
* The supported analog video formats for this model TX are RGBHV, RGBS, RGsB, and Y/Pb/Pr video (Y/Pb/Pr
up to 1080p).
Product Notes
Either of the DGX Fiber TX modules listed can be paired with either of the DGX Fiber RX modules
as an end-to-end solution for transmission over single fiber or any of the modules can be used as an
integrated part of an AMX DGX matrix switcher that supports single fiber transmission. This manual
contains complete information for stand-alone use. For use in a system with a distribution matrix, see
page 25 in this manual and the distribution matrix’s
Instruction Manual at www.amx.com .
The following descriptions explain how the modules work as an end-to-end solution. The TX and RX
work in the same way when used in conjunction with DGX Fiber boards in a DGX matrix switcher.
DGX Fiber TX Modules
–
two types of transmitter modules are available, one model is for analog
signals and the other model is for a DVI signal. The analog module receives RGBHV, RGBS, RGsB, or
Y/Pb/Pr video signals, and the DVI Fiber module receives a DVI video signal from the source device.
The modules also receive either a digital audio signal or an analog stereo audio signal from the source
device (digital takes precedence if both are connected). Both the video and audio signals are transmitted
over an SC terminated fiber cable to a DGX RX module. The RS-232 port on each TX supplies
unidirectional RS-232 serial data over the SC terminated fiber cable with the data flow in the same
direction as the video signal. In addition to supporting transmission of incoming signals, the DGX TX
modules also include a local video output connector for sending the video signal directly from the source
to a local destination device.
DGX Fiber RX Modules
–
two types of receiver modules are available to accept the signal from a TX
module’s SC terminated fiber cable. The DGX HD-15 RX converts the video signal to RGBHV for the
destination device, and the DGX DVI RX converts the video signal to DVI for the destination device.
Both modules feature SmartScale
®
(integrated EDID output scaling) to make sure the output resolution
is appropriate regardless of the type of incoming video. They also support a Manual (override) option for
setting up custom resolutions and a Bypass option. The audio on the RX is output on both the digital
audio port and the analog stereo audio port. The RS-232 port on each RX accepts any unidirectional
RS-232 serial data over the SC fiber from the TX.
FG # Type Model Description
FG1010-200-01 TX AVB-TX-DGHD15-SC Fiber Analog video* + analog or digital audio over SC fiber
FG1010-210-01 TX AVB-TX-DGX-DVI-SC Fiber DVI video + analog or digital audio over SC fiber
FG1010-400-01 RX AVB-RX-DGX-SC Fiber-HD15 SC fiber to RGBHV video + analog and digital audio
FG1010-410-01 RX AVB-RX-DGX-SC Fiber-DVI SC fiber to DVI video + analog and digital audio