Amsco STERIS Скачать руководство пользователя страница 41

Страница: 41 / 48

6 — Troubleshooting

Operator Manual

AMSCO

Rack Return

11830378_C

Troubleshooting

6.1 Introduction

IMPORTANT:

A listing of the Safety Precautions to be observed when operating and servicing this equipment can be found in

Section 1, Safety Precautions

of this manual. Do not operate the equipment until you have become familiar with this

information.

This section describes the types of malfunctions which may occur and indicates probable causes.
If unable to correct the problem with the use of the chart, or if a problem occurs that is not described on the chart,

please call STERIS. Service charges may be incurred. Consult your warranty for details.

WARNING
PERSONAL INJURY AND/OR EQUIPMENT DAMAGE HAZARD

Repairs and adjustments to this equipment must be made only by STERIS or STERIS-

trained service personnel. Repairs and adjustments performed by unqualified personnel

or installation of unauthorized parts could cause personal injury, result in improper

equipment performance, void the warranty or result in costly damage. Contact STERIS

regarding service options.

If an obstruction is present in a door, door automatically stops from closing. Do not

attempt to remove obstruction until door is fully open.

If door is stuck by a rack or another object during opening or closing sequence, release

pressure inside door cylinder by turning rack return power OFF and by waiting about 3

minutes before trying to unstuck the door.

WARNING
ELECTRIC SHOCK AND/OR BURN HAZARD

Repairs and adjustments to this equipment must be made only by STERIS or STERIS-

trained service personnel. Service personnel must disconnect all utilities to unit before

servicing. No one should service unit unless all utilities have been properly locked out.

Always follow local electrical codes and safety-related work practices.

Fasteners and star washers are used to ensure protective bonding continuity. Always

reinstall any star washer which may have been removed during installation or servicing.

Содержание STERIS

















































Результаты поиска

Содержание STERIS

Отзывы:

Бренды по названию

Популярные бренды

Amsco STERIS, Руководство пользователя

Результаты поиска

Содержание STERIS

Отзывы:

Бренды по названию

Популярные бренды