Amsco STERIS Скачать руководство пользователя страница 21

Страница: 21 / 48

3 — Component Identification

Operator Manual

AMSCO

Rack Return

11830378_C

Stop Rod (Accessory)
Adapters for ATLAS WAV System (Accessory)
Adapters for Auto-Docking Transfer Carts (Accessory)
Status Indicator Lighting (Accessory)
Audio Communication System (Accessory)

Chamber

The high-quality stainless-steel chamber is used to pass washer accessories and manifold racks from clean to soiled

side.

Doors

The AMSCO® Rack Return is equipped with two vertical sliding doors; one on each side. Doors are automatically

operated by pneumatic cylinders. Doors are constructed of polycarbonate to allow the operator to see inside the

chamber.
Safety locks, located at the top of each door can be used to keep the door in open position for cleaning or maintenance

purposes.

1 Safety Lock

Figure 3-2. Safety Lock

Hands-Free Sensors
For rack return without automation:

The rack return is equipped with sensors, located over each door, for a hands-free

opening of the vertical sliding doors. They allow operators to load the rack return without physical contact, by pushing

the transfer cart against the equipment.

If SCS Conveyor System is present

, hands-free sensors are deactivated on the

sides where conveyors are connected.

For rack return used with ATLAS WAV System:

The rack return is equipped with a sensor located under clean side door

allowing for automatic opening and closing the vertical sliding door by the ATLAS Workflow Automation Vehicle.

Содержание STERIS

















































Результаты поиска

Содержание STERIS

Отзывы:

Бренды по названию

Популярные бренды

Amsco STERIS, Руководство пользователя

Результаты поиска

Содержание STERIS

Отзывы:

Бренды по названию

Популярные бренды