Ametek Western Research IPS-4, Руководство пользователя

Страница: 132 / 238

4-40 | IPS-4 Dual Bench (UV / IR) Analyzer
Figure 4-36.
Restore Factory
Settings screen.
Restore factory settings. Are you sure?
Press

for yes.
Press X for no.
HOME ALARMS STATUS SETUP
Figure 4-35.
Restore Settings
screen.
Restore settings. Are you sure?
Press

or yes.
Press X for no.
HOME ALARMS STATUS SETUP
3. Press
ENTER
to initiate the command to restore the settings. The soft-
ware will prompt: “ Restore settings. Are you sure? ” (Figure 4-35) or
“ Restore factory settings. Are you sure? ” (Figure 4-36).
• Press
CANCEL
( X ) to answer no.
• Press
ENTER
(

) to answer yes. The analyzer begins restoring con-
figuration settings from a file stored in the analyzer. The message
“ Please wait ... ” appears while the analyzer restores its settings.
- If you selected Restore settings , the analyzer begins restor-
ing its most recently saved configuration settings (when the
Backup settings command was last used) from a file called
“ user.xml .”
- If you selected Restore factory settings , the analyzer begins re-
storing the original factory default configuration settings from
a file called “ factory.xml .”
After the settings have been restored, the analyzer enables the set-
tings.
Cycle power to the Analyzer Off-On.