Ametek Western Research IPS-4, Руководство пользователя

Страница: 120 / 238

4-28 | IPS-4 Dual Bench (UV / IR) Analyzer
To change the settings for a relay:
1. Enter a password to allow changes to be made to the relay settings.
2. Select one of the Relay ( 1–8 ) sub-menus. Press
ENTER
to view the pa-
rameters for that relay.
3. Select the required parameter ( Relay Function, Source, Value, or Delay ),
change the settings, and press
ENTER
.
Repeat this step for each parameter and each relay.
When entering a value for the Relay Value and Delay parameters:
• Use the
UP
/
DOWN
arrow key to increase/decrease the value in
increments of one (1.00). This works best for minor changes. The
relay value is displayed on the right side of the screen.
• If a value exists, use the
LEFT
arrow key as a backspace to erase the
characters to the left of the cursor ( ‘ _ ’ ) if applicable, then use the
numeric keys to enter the new value. This works best for drastic
changes.