Customer Service 800-528-7411 or 602-470-1414
Page 29 of 68
•
Channel (Spectra 2400 Compatible only) - Set to a hopping channel number
between 1 and 43. All radios talking directly to the base station radio (not thru a
repeater) must be set to the same channel. If you are experiencing poor
communication, there may be interference, so try a different channel.
•
The Nano radios don't have a channel.
•
Retries - Typically set to 5. Specifies the number attempts that the base station radio
uses for a successful packet transmission. The instruments also have a Retries
setting for transmitting packets to the base station radio.
•
Net ID - Default is 1912, but can be set a desired. All radios must have the same
setting.
•
Power - The radio can have its transmit power reduced. The FCC requires that
lower power (< 1W) be used if a high gain antenna is used.
Site Location (Right):
Setup the site address.
System Settings (Bottom):
•
Database Location - The database location can be changed if desired. The
database is a SQLite file, which can be read by other compatible programs. Note,
the settings.xml file, which contains the program configuration, is stored in the
default location. Both files should be periodically backed up. Corrupt polling (.log)
files are stored in the default location for diagnostic purposes if needed. The (.log)
files can be periodically deleted to save disk space; consider deleting (.log) files prior
to backup.
•
[Re-Index Database] - If JMS becomes slow processing readings, re-index the
database.
•
Run on User Login - Start JMS when the user logs in. JMS is intended to run under
a single user login. If multiple users use the JMS PC, then consider creating a single
common user for JMS; users can login using the JMS login as needed.
