Ametek Brookfield JEROME 651 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 68

background image

Customer Service 800-528-7411 or 602-470-1414

Page 10 of 68

Antenna Mounting Brackets

P/N 300-0489 - Antenna Mounting Bracket, Pole Mount
P/N 300-0490 - Antenna Mounting Bracket, Right Angle Mount To Wall
P/N 300-0491 - Antenna Mounting Bracket, Straight Mount To Horizontal Surface

Call Customer Service for a part that is not listed.

7 651 INSTALLATION

7.1 Mounting

•

Because of the weight of the 651, two people may be required for installation.

•

Wall Mounting:

Obtain the appropriate anchors from a hardware store for the installation wall type.  Drill
one of the upper mounting holes into the wall.  Hold the 651 to the wall and mark the
second upper hole.  Drill the second mounting hole into the wall.  Temporarily mount the
651 to the wall and mark the lower two holes.  Remove the 651 and drill the lower two
mounting holes into the wall.  Permanently mount the 651 using all four mounting holes.

7.2 Power Connection

POWER CONNECTION NOTES:

•

When a generator is used to power the 651, a high-quality line conditioner or voltage

regulator is required to ensure a pure sine wave and regulated voltage is applied to the
instrument. The gold film sensor may be damaged by voltage that varies in amplitude or
by surges, spikes, and/or noise on the power line.

•

Follow appropriate local and national codes when installing the 651.

•

It is recommended to use a ground fault circuit interrupter (GFCI) on the 115V or 220V

AC power circuit for safety in an outdoor environment.

•

For fixed-point installations where an FTM (P/N Z2600 0930 or Z2600 0918) is going to

be used to verify the operation and compliance of the system, the installation of a
weatherproof electrical receptacle near the monitoring system is recommended.

The 651 power voltage is not switch-able in the field. The 651
is factory configured to operate at either 115VAC or 230VAC.
The switch on the main circuit board indicates the proper
voltage and cannot be changed by the user.

«
...
8
9
10
11
12
...
»

Содержание Brookfield JEROME 651





































































Отзывы:

Нет отзывов

Похожие инструкции для Brookfield JEROME 651

Бренд: Atomos Страницы: 4

TUNICS T100S-HP

Бренд: Yenista Optics Страницы: 66

Бренд: Datavideo Страницы: 26

Бренд: Datcon Страницы: 84

Бренд: IET Labs Страницы: 114

Бренд: Gas Data Страницы: 99

Бренд: Divertug Страницы: 47

SoundTrack LxT N/Forcer

Бренд: Larson Davis Страницы: 12

Бренд: Mark-10 Страницы: 26

Бренд: Velleman Страницы: 107

Бренд: Sensia Страницы: 139

Бренд: York Страницы: 2

Бренд: Technoline Страницы: 1

Бренд: Fluke Biomedical Страницы: 28

Бренд: VOLTCRAFT Страницы: 108

Бренд: Wetekom Страницы: 22

SoundAdvisor NMS045

Бренд: Larson Davis Страницы: 64

Бренд: Tenma Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды