AMETEK Brookfield
Page 55
Manual No. M08-372-F1116
TA-RCA
ROLLER CAM ACCESSORY
This accessory’s grips measure the tensile strength and tear characteristics of
material such as polymer films.
TA-RT
RAFT TESTER
The Raft Tester looks like a L-hook. It is used in the assessment of the Strength
of Alginate Rafts, used in the treatment of gastro-oesophagael reflux. The force
required to pull the raft tester up through the raft is recorded as the raft strength
(peak Load). Requires Fixture Base Table TA-BT-KIT.
TA-SBA
SET OF 4 SHEAR BLADES
Including Warner Bratzler test jig complete with slotted base. The blade set
includes four shear blades, firmly held within a specially designed blade holder.
The jig is utilized in the measurement of shearing and cutting forces, as the
blades pass through a sample. Requires Fixture Base Table TA-BT-KIT.
TA-SFF
SPAGHETTI FLEXURE FIXTURE
This fixture is used to quantify flexure characteristics of uncooked spaghetti and
other dry pastas.
TA-SFJ
SLIDING FRICTION JIG
This fixture measures the coefficient of friction for packaging materials according
to ASTM D1894. Requires Fixture Base Table TA-BT-KIT.
TA-STF
SPREAD TEST FIXTURE
This fixture quantifies the force to spread a material on a surface. The Fixture
includes one male cone, five female cones and one female cone holder. Requires
Fixture Base Table TA-BT-KIT.
TA-STJ
SYRINGE TESTING JIG
This fixture is used for measuring the force required to push or pull a syringe
plunger. Important to pre-filled syringe market or manufacturers of custom
syringe products. Fixture designed to hold syringe barrel while pushing or
pulling syringe plunger. A clamping mechanism to hold syringe barrel adjusts
to accommodate barrel up to 40mm in diameter. Requires Fixture Base Table
TA-BT-KIT.
TA-TCA
TABLET COATING ADHESION FIXTURE
This fixture measures the adhesion force of a tablet coating to a tablet. Requires
Fixture Base Table TA-BT-KIT.
TA-TEF
TUBE EXTRUSION FIXTURE
This fixture measures the force needed to squeeze cream or paste out of a tube.
Requires Fixture Base Table TA-BT-KIT.
TA-TPB
THREE POINT BEND TEST FIXTURE
Three point bend test fixture is used for fracture tests of brittle materials. Sample
supports can be adjusted to provide spacing from 10mm-70mm. Sample supports
Содержание BROOKFIELD CT3
Страница 2: ......