American Megatrends Olympus III, Руководство пользователя

Страница: 86 / 146

American Megatrends, Inc., Olympus III User’s Guide (Series 875)
76
Section 2 Advanced Setup,
Continued
Floppy A
Floppy B
Floppy disk drives are slowly being phased out of most systems. Since it is a relatively
slow and low storage medium, most do not find a need to install it. However, the
Olympus III motherboard still retains this legacy feature. It is especially useful when you
are trying to boot to DOS. The Optimal and Fail-Safe default setting is
Disabled .
Option Description
Disabled Set this value to prevent the system from using the selected Floppy Drive location.
360 KB 5.25" Set this value to allow the system to address the selected Floppy Drive location as a 360 KB
5.25” floppy drive.
1.2 MB 5.25" Set this value to allow the system to address the selected Floppy Drive location as a 1.2 MB
5.25” floppy drive.
720 KB 3.5" Set this value to allow the system to address the selected Floppy Drive location as a 720 KB
3.5” floppy drive.
1.44 MB 3.5" Set this value to allow the system to address the selected Floppy Drive location as a 1.44 MB
3.5” floppy drive.
2.88 MB 3.5" Set this value to allow the system to address the selected Floppy Drive location as a 2.88 MB
3.5” floppy drive.
SuperIO Configuration
BIOS SETUP UTILITY
v02.53 (C) Copyright 1985-2003, American Megatrends, Inc.
Main Advanced PCIPnP Security
Exit Power
Boot
Chipset
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+ -
F1
F10
ESC
SuperIO Configuration
AllowsBIOS to Enable
or Disable Floppy
Controller.
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
[378]
[ECP]
[DMA3]
[IRQ7]
Onboard Floppy Controller
This field allows you to enable or disable the floppy disk drive controller on the Olympus
III motherboard. The default value for this setting is
Enabled .
Option Description
Enabled Set this value to allow the system to use the onboard floppy disk drive controller. This is the
default value.
Disabled Set this value to prevent the system from using the onboard floppy disk drive controller.
Cont’d