American Megatrends Olympus III, Руководство пользователя

Страница: 82 / 146

American Megatrends, Inc., Olympus III User’s Guide (Series 875)
72
Section 2 Advanced Setup,
Continued
Primary and Secondary IDE Master : ATAPI CD ROM
BIOS SETUP UTILITY
v02.53 (C) Copyright 1985-2003, American Megatrends, Inc.
Main Advanced PCIPnP Security
Exit Power
Boot
Chipset
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+ -
F1
F10
ESC
Primary IDE Master
Device
Vendor
LBA Mode
PIO Mode
Async DMA
Ultra DMA
: ATAPI CDROM
: CDU5211
: Supported
: 4
: MultiWord DMA-2
: Ultra DMA-2
Select the type
of device connected
to the system.
Type
PIO Mode
DMA Mode
[Auto]
[Auto]
[Auto]
Field Description
Device Type of device, such as hard disk drive.
Vendor Manufacturer of the device.
LBA Mode LBA (Logical Block Addressing) is a method of addressing data on a drive.
PIO Mode IDE PIO mode programs timing cycles between the IDE drive and the programmable IDE
controller. As the PIO mode increases, the cycle time decreases.
Async DMA This indicates the highest Asynchronous DMA Mode that is supported.
Ultra DMA This indicates the highest Synchronous DMA Mode that is supported.
Type
This option sets the type of device that the AMIBIOS attempts to boot from after the
Power-On Self-Test (POST) has completed. The Optimal and Fail-Safe default setting is
Auto.
Option Description
Not Installed Set this value to prevent the BIOS from searching for an IDE disk drive on the specified
channel.
Auto Set this value to allow the BIOS auto detect the IDE disk drive type attached to the specified
channel. This setting should be used if an IDE hard disk drive is attached to the specified
channel. This is the default setting.
CDROM This option specifies that an IDE CD-ROM drive is attached to the specified IDE channel. The
BIOS will not attempt to search for other types of IDE disk drives on the specified channel.
ARMD This option specifies an ATAPI Removable Media Device.
This includes, but is not limited to:
•
ZIP
•
LS-120
Cont’d