American Megatrends Olympus III, Руководство пользователя

Страница: 87 / 146

Chapter Three : AMIBIOS Setup
77
Section 2 Advanced Setup,
Continued
Serial Port1 Address
This option specifies the base I/O port address and Interrupt Request address of serial
port 1. The Optimal setting is
3F8/IRQ4 . The Fail-Safe default setting is Disabled.
Option Description
Disabled This option prevents the serial port from accessing any system resources. It is not made
available.
3F8/IRQ4 This option allows the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt
address. This is the default setting. The majority of serial port 1 or COM1 ports on computer
systems use IRQ4 and I/O Port 3F8 as the standard setting. The most common serial device
connected to this port is a mouse. If the system will not use a serial device, it is best to set this
port to
Disabled .
3E8/IRQ4 This option allows the serial port to use 3E8 as its I/O port address and IRQ 4 for the interrupt
address. If the system will not use a serial device, it is best to set this port to
Disabled .
2E8/IRQ3 This option allows the serial port to use 2E8 as its I/O port address and IRQ 3 for the interrupt
address. If the system will not use a serial device, it is best to set this port to
Disabled .
Serial Port2 Address
This option specifies the base I/O port address and Interrupt Request address of serial
port 2. The Optimal setting is
2F8/IRQ3 . The Fail-Safe setting is Disabled.
Option Description
Disabled This option prevents the serial port from accessing any system resources. It is not made
available.
2F8/IRQ3 This option allows the serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt
address. This is the default setting. The majority of serial port 2 or COM2 ports on computer
systems use IRQ3 and I/O Port 2F8 as the standard setting. If the system will not use a serial
device, it is best to set this port to
Disabled .
3E8/IRQ4 This option allows the serial port to use 3E8 as its I/O port address and IRQ 4 for the interrupt
address. If the system will not use a serial device, it is best to set this port to
Disabled .
2E8/IRQ3 This option allows the serial port to use 2E8 as its I/O port address and IRQ 3 for the interrupt
address. If the system will not use a serial device, it is best to set this port to
Disabled .
Cont’d