Ambit PIB v1.5 Скачать руководство пользователя страница 39

Страница: 39 / 72

Section 3 • Programming Instructions

ACTION

AUDIBLE

INDICATOR

VISUAL INDICATOR

Set dose interval time:

(A) Press and release the RUN/

PAUSE button to increase the dose

interval time or press and release

the BOLUS button to decrease the

dose interval time.

“INT” is displayed for two

seconds to indicate that the

pump is in dose interval

mode.

“hr:min”and clock icons and

the hours section flash.

(B) When the desired dose interval

time appears in the display, press

and hold the RUN/PAUSE button

until one beep is heard to accept

the setting and move onto the

next digit.

NOTE: Dose interval time

is displayed in hours and

minutes (hh:mm).

to set the digits in the minutes

section.

“hr:min”and clock icons and

minutes section flash.

Dose interval time is

established.

(D) If during programming, you

need to move backwards in the

display to a previous setting, press

and hold the BOLUS button until

one beep is heard.

Each time the BOLUS button

is pressed, the display moves

backward one screen to

enable review or correction.

NOTE

: If dose volume is set to “0,” this step will be skipped.

NOTE

: The minimum dose interval time is dependent on the dose volume chosen. The maximum

dose interval is always 24:00 (hh:mm).

Set volume to be infused:

(A) Press and release the RUN/

PAUSE button to increase the

number or press and release the

BOLUS button to decrease the

number.

“ml” is displayed, and bag

icon and the hundreds digit

flash.

Volume to be infused is

displayed in ml.

(B) When the desired number

appears in the display, press and

hold the RUN/PAUSE button

until one beep is heard to accept

the setting and move onto the

next digit.

One beep

“ml” is displayed, and bag

icon and the respective digits

flash.

Содержание PIB v1.5









































































Результаты поиска

Содержание PIB v1.5

Отзывы:

Похожие инструкции для PIB v1.5

Бренды по названию

Популярные бренды

Ambit PIB v1.5, Руководство для клиницистов

Результаты поиска

Содержание PIB v1.5

Отзывы:

Похожие инструкции для PIB v1.5

Бренды по названию

Популярные бренды