Section 1 • Introduction
14
Figure 1-6
Dose and bolus (P+P mode) infusion pattern of multiple dose delays
(does not apply to the
PIB-IL
v1.5
)
Each time a dose is delayed, it is added to the previous delays. In Figure 1-6, the second dose
is delayed by about 10 minutes (first dose delay), from 90 minutes to 100 minutes. This means
that the third dose should have occurred at 190 minutes, but due to the second delay of a little
over 5 minutes (second dose delay), the third dose occurs at a little over 195 minutes. If no
other delays occur, then all the remaining doses will be delayed by the sum of the first and
second dose delays, or a little over 15 minutes.
NOTE:
Figure 1-5 does not apply to the PIB-IL
v1.5
pump; see Figure 1-7 and Figure 1-8
for PIB-IL
v1.5
P+P infusion pattern.
