background image

Section 3  •  Programming Instructions

40

ACTION

AUDIBLE 

INDICATOR

VISUAL INDICATOR

6

Set bolus volume:

(A) Press and release the RUN/

PAUSE button to increase the 

number or press and release the 

BOLUS button to decrease the 

number.

Letter “b,” numbers left of 

decimal point, “ml” and bolus 

icon flash.

(B) When the desired number 

appears in the display, press and 

hold the RUN/PAUSE button until 

one beep is heard to accept the 

setting.

One beep

NOTE:

 Bolus volume is 

displayed in ml.

(C) Repeat steps 5(A) and 5(B) to set 

the digit to the right of the decimal 

point (00.0  to  00.9).

Letter “b” is displayed, and 

number right of decimal point, 

“ml” and bolus icon flash.

Bolus volume is established.

(D) If during programming, you 

need to move backwards in the 

display to a previous setting, press 

and hold the BOLUS button until 

one beep is heard.

Each time the BOLUS button 

is pressed, the display moves 

backward one screen to enable 

review or correction.

NOTE

:   The limits for the bolus volume are 0.0 to 50.0 ml. 

7

Set lockout time:

(A) Press and release the RUN/

PAUSE button to increase the 

lockout time or press and release 

the BOLUS button to decrease the 

lockout time.

“LOt” is displayed for two 

seconds to indicate that the 

pump is in lockout mode.

“hr:min” is displayed, and 

bolus, lock and clock icons, as 

well as numbers in the hour 

section, flash.

(B) When the desired lockout time 

appears in the display, press and 

hold the RUN/PAUSE button until 

one beep is heard to accept the 

setting.

One beep

NOTE: 

  Lockout time is 

displayed in hours and minutes.

NOTE:

   If bolus volume is set 

to “0” this step will be skipped.

(C) Repeat steps 6(A) and 6(B) to set 

the digits in the minutes section.

“hr:min” is displayed, and 

bolus, lock, and clock icons, as 

well as numbers in the minutes 

section, flash.

Lockout time is established

ml

ml

Содержание PIB v1.5









































































Отзывы: