MODEL: CY-326 PRODUCT CODE: 54719 09/2016
14
AFTER SALES SUPPORT
1300 886 649
AUS
FAQs
Can I use the blender without the measuring cup inside the lid?
You can only use the blender without the measuring cup
if you use the plunger to
assist with food processing
. The pouring hole in the lid must always be covered
during processing, either with the measuring cup or with the plunger. Leaving the
hole uncovered means you risk food spilling out of the jug during processing.
Blended food is leaking out of the jug. What has gone wrong?
If food is leaking from the top of the jug, it may be overfilled. Remove some of the
contents for processing separately. Also make sure the lid and lid plug/measuring
cup are securely in place. If liquid is leaking out of the base of the jug, contact our
after sales support centre and arrange examination of the product.
How can I remove the blades from the blender jug for cleaning?
Don't! Never attempt to remove or disassemble the blades from the blender jug.
They are part of the jug and must not be removed. To clean the jug, simply let
the machine run an automatic blending cycle with a little water and detergent, as
described on the opposite page.
The blender is plugged in but it is not working.
Make sure that your power point is in working order and the appliance is properly
plugged in. Also ensure that the blender jug sits properly on the base. Turn the
Speed Control Dial to [ 0 ] and then to the desired speed.
The blender stopped working during processing.
After longer periods of processing, the overheat protection may stop the motor
in order to protect it from overheating. Switch off and unplug the unit and let the
motor cool down for 30 minutes, then restart.
What is the best way to puree cooked vegetables for baby food?
For pureeing, feed small portions into the jug one by one instead of adding all
ingredients at once. Depending on the type of vegetable, you may have to add a
little liquid for a creamier consistency.
Can I crush ice in the blender?
Yes, the blades are strong enough to crush ice. With the motor switched off, add
ice cubes to the blender jug, replace the lid and process using Ice-Crushing mode.
Can I make soup in the blender?
No, always let liquids cool to room temperature before processing. Processing hot
liquids may result in the unit exploding due to the steam created.
