MODEL: CY-326 PRODUCT CODE: 54719 09/2016
16
AFTER SALES SUPPORT
1300 886 649
AUS
Changing the Rubber Drive Gear
The High Performance Blender comes supplied with two spare rubber drive
gears, which may need replacement due to deterioration after extensive use of the
appliance. It is located within the drive gear on top of the motor base. To replace
it, remove the original rubber drive gear using your fingers or pliers (Fig. 10). Press
the new rubber drive gear down until it is firmly in place and level with the top of
the motor drive gear (Fig. 11).
Other Useful Information (Cont.)
Storage
Store the clean and dry appliance, and all its parts, in the original carton, which will
protect it from dust. Store it in a clean and dry place, unplugged from the power
supply and out of children's reach. Do not wrap the cord around the appliance
during storage.
Service and repair
Except for the rubber drive gear (see below), the unit has no user-serviceable parts
contained within. Do not attempt to repair, disassemble or modify the appliance. If
the appliance requires repair or service, contact our after sales support centre for
advice.
Fig. 10
Fig. 11
Safety Features
• The High Performance Blender is
equipped with a safety switch (Fig. 9),
which prevents operation if the jug does
not sit properly on the base.
• An in-built thermostat switches off the
appliance if the motor overheats. In
such a case, switch off the appliance
and let the motor cool down for half an
hour before restarting the appliance.
Fig. 9
