MODEL: CY-326 PRODUCT CODE: 54719 09/2016
12
AFTER SALES SUPPORT
1300 886 649
AUS
Instructions (Cont.)
Adding Ingredients
• To add ingredients to the jug during
operation, stop operation and remove
the lid plug/measuring cup from the
lid. Turn the cup anticlockwise and
take it out (Fig. 7).
• Add additional ingredients through the
pouring hole in the lid.
• Cover again before resuming
operation, or use the plunger.
Using the Plunger
• The specially designed plunger will
help you keep all ingredients in the
blade blending area during demanding
processing tasks.
• To use the plunger, stop operation,
remove the lid plug/measuring cup
from the lid and insert the plunger
through the pouring hole (Fig. 8).
• Slowly move the plunger down
towards the blades and around the
sides to push food pieces safely into
the blade blending area while the unit
is running.
CAUTION!
• After every 2 minutes of continuous use, the blender must be rested for
1 minute.
After 4 cycles, allow the motor to cool completely before further
use in order to prevent overheating and consequent damage.
• Handle the blender
with care, the cutting blades are very sharp.
• Always return the Speed Control Dial back to [ 0 ] after use.
• Do not run the blender without any liquid load in the jug.
Fig. 7
Fig. 8
Finishing Up
• When your ingredients are properly blended/processed, turn the
Speed Control
Dial
back to [ 0 ] and unplug the appliance from the power point.
• Wait until the blades no longer move before removing the blender jug. Simply lift
it off the motor base. No rotation is required.
WARNING!
Never use the plunger without the
lid properly in place.
