MODEL: CY-326 PRODUCT CODE: 54719 09/2016
9
AFTER SALES SUPPORT
1300 886 649
AUS
Assembly
• Your new High Performance Blender comes with a set of Japanese stainless
steel blades (Fig. 1). This blade set is fully assembled at the base of the jug. You
do not have to assemble the blades, nor do you take them out of the jug for
cleaning.
• Make sure that the appliance is disconnected from the mains power supply and
switched off: the speed control dial should be set to [ 0 ] (Fig. 2).
Getting Started (Cont.)
Fig. 1
Fig. 2
Fig. 3
• Place the jug assembly into position
on the motor base (Fig. 3), making
sure it is properly aligned on the drive
gear.
• Your blender is now ready for use.
NOTE
The blender jug must sit properly
on the base, otherwise the safety
switch will prevent the motor from
turning on.
• When operating the blender for the
first time, you may notice an odour
coming from the motor. This is due to
the parts being new and will subside
soon. It is no cause for concern.
Ensure sufficient ventilation.
Drive Gear
Safety
Switch
