manualshive.com logo in svg

Alto-Shaam CT CLASSIC CTC10-10E, Руководство по установке

Приобретите Alto-Shaam CT CLASSIC CTC10-10E и сделайте свою кухню более эффективной. На нашем сайте вы можете бесплатно скачать Руководство оператора для этого оборудования. Получите доступ к полезным инструкциям и рекомендациям по использованию manualshive.com.

Поделиться
Скачать
background image

MN-35947       

•

       Rev 15       

•

       01/18       

•

       Combitherm® CT PROformance™ and CT Classic Series Installation Manual        

•

       3

Delivery

D e l i v e r y

This Alto-Shaam appliance has been thoroughly 
tested and inspected to ensure only the highest 
quality unit is provided. Upon receipt, check for any 
possible shipping damage and report it at once to 
the delivering carrier. See Transportation Damage 
and Claims section located in this manual.

This appliance, complete with unattached items 
and accessories, may be delivered in one or more 
packages. Ensure all standard items and options 
have been received with each model as ordered.

Save all the information packed with the appliance. 
Register online at www.alto-shaam.com to ensure 
prompt service in the event of a warranty parts and 
labor claim.  

This manual must be read and understood by all 
people using or installing the equipment model.  
Contact the Alto-Shaam Tech Team Service 
department if you have any questions concerning 
installation, operation, or maintenance.

1-800-558-8744; [email protected]

u n p a c k i n g

•  Carefully remove the appliance 

from the carton or crate.

 

notICe:

  

 do not discard the 
carton and other 
packaging material 
until you have 
inspected the unit 
for hidden damage 
and tested it for 
proper operation.

•  Read all instructions in this manual carefully 

before installing this appliance, using the 
appliance or performing routine maintenance. 
Following procedures other than those indicated 
in this guide to use and clean the appliance is 
considered inappropriate and may cause damage, 
injury or fatal accidents, in addition to invalidating 
the guarantee and relieving Alto-Shaam of all 
liability.

•  dO NOT dISCARd THIS MANUAL.  

This manual is considered part of the appliance 
and is provided for the owner or manager of the 
business and for training personnel. Additional 
manuals are available from the Alto‑Shaam 
Tech Team Service Department.

•  Remove all protective plastic film, packaging 

materials, and accessories from the appliance 
before connecting electrical power. Store any 
accessories in a convenient place for future use.

CAuTION

Appliance and accessories may be 

heavy. To prevent serious injury, 

always 

use a suff icient number of trained and 

experienced workers when moving or 

leveling appliance and handling accessories.

ENVIRONmENTAL CONDITIONS

•  Operational Environmental Conditions
•  Unit must acclimate to room temperature in the 

environment it is placed. 24 hours is recommended.

•  Ambient temperature range of 60°F to 110°F (16°C to 43°C).
•  Relative humidity of less than 95% non-condensation.
•  Atmospheric pressure range of 50KPa to 106KPa.

The serial number is required for all inquiries.

Always include both model and serial number(s) in any 

correspondence regarding the appliance.

 model:   ______________________________________________  
 

Serial number:   ______________________________________________

  Purchased from:   ______________________________________________
 

Date installed:   ____________________  voltage:   _____________

Содержание CT CLASSIC CTC10-10E

















































































Отзывы:

Нет отзывов

Похожие инструкции для CT CLASSIC CTC10-10E

vc999 K4 Operating Instruction preview
K4
Бренд: vc999 Страницы: 59
Saferoad F1 Installation Instruction preview
F1
Бренд: Saferoad Страницы: 24
C.M.O FL Series Instruction And Maintenance Manual preview
FL Series
Бренд: C.M.O Страницы: 10
Bang & Olufsen BeoPlay A9 Quick Manual preview
BeoPlay A9
Бренд: Bang & Olufsen Страницы: 2
Eaton X10 Installation Manual preview
X10
Бренд: Eaton Страницы: 21
NANO Pulsar Operating Instructions preview
Pulsar
Бренд: NANO Страницы: 4
Hammer FR Series Operation And Maintenance Manual preview
FR Series
Бренд: Hammer Страницы: 42
IDEAL 61-521 Instruction Manual preview
61-521
Бренд: IDEAL Страницы: 12
Lars Thrane LT-1000 NRU User & Installation Manual preview
LT-1000 NRU
Бренд: Lars Thrane Страницы: 50
Rain-Flo Irrigation 1670 Operating Manual preview
1670
Бренд: Rain-Flo Irrigation Страницы: 16
KCI ActiV.A.C. Quick Reference Manual preview
ActiV.A.C.
Бренд: KCI Страницы: 2
KCI ActiV.A.C. International User Manual preview
ActiV.A.C.
Бренд: KCI Страницы: 60
Landoll 7833 Operator'S Manual preview
7833
Бренд: Landoll Страницы: 38
Xylem McDonnell & Miller PSE-800-M Application, Installation, Operation, And Maintenance Manual preview
McDonnell & Miller PSE-800-M
Бренд: Xylem Страницы: 20
Össur AirForm Night Splint Instructions For Use Manual preview
AirForm Night Splint
Бренд: Össur Страницы: 16
Össur Airform Instructions For Use Manual preview
Airform
Бренд: Össur Страницы: 17
Orliman 94231 Use And Maintenance Instructions preview
94231
Бренд: Orliman Страницы: 11
Maquet Betastar 1131 Maintenance & Repair Instructions preview
Betastar 1131
Бренд: Maquet Страницы: 232

Бренды по названию

Популярные бренды

Загрузить еще бренды